Show your patriotism and fly the America. Balsa fins and a molded plastic cone make this a good Skill Level One build with parachute recovery.

Quest Skill Level 1 beginner modeler kits may require a little measuring, gluing, sanding and painting. Assembly usually takes 45 to 90 minutes. Drying time for glue and painting could take up to 3 hours.

This kit requires assembly. Hobby glues, finishing supplies, building tools, launch system and rocket motors for launching are not included.

Launch supplies sold separately. Requires Complete Launch System (Q7700), Quest Q-Jet™ rocket motors with FirstFire Micro™ Initiators and Recovery Wadding. One 9-volt, snap-top, Lithium battery is required for the Q2 Launch Controller - Not Included.

Recommended for ages 10 to adult. Direct adult supervision is suggested for those under 12 years of age when building or flying model rockets.

Specifications:

Skill Level 1
       Length: 14 in. (35.6 cm)

    Diameter: 1.181 in. (30 mm / T30)

    Weight: 1.1 oz. (31.2 g)

    Recovery: 14 in. Parachute

    Fins: Laser-cut Balsa

    Décor: Self-adhesive Decals

    Flights up to 1500 ft. (457 m)

    Uses Quest Q-Jet™ Black Max™: A3-4FJ (1st flight), B4-4FJ, C12-4FJ, C12-6FJ, C12-8FJ, D16-6FJ, D16-8FJ rocket motors.

    Uses Quest Q-Jet™ White Lightning™: B6-4W, C18-6W, C18-8W, D20-6W, D20-8W rocket motors.

    Other brands of model rocket motors, with a similar motor type (power) designation, should be OK for use in this product.

Quest model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, starters and recovery wadding are required - sold separately-unless otherwise specified.